HERED ELECTRIC · FACTORY-DIRECT SUPPLIER
Magnetic Proximity Sensor Manufacturer & OEM Supplier
Threaded M8, M12, and M18 cylindrical magnetic proximity sensors (BHLN10 & MR series) for reliable magnet detection through non-ferromagnetic stainless steel, aluminum, and plastic walls.
Permanent-magnet detectionSERIES OVERVIEW
Quick-Reference Product Matrix
| Series / Family | Housing & Mounting | Sensing Range | Electrical Output |
|---|---|---|---|
| Solid-State Magnetic (BHLN10-GM12 / GM18) | M12 & M18 flush barrels | 10 mm nominal (magnet-dependent) | DC 3-wire NPN/PNP, DC/AC 2-wire |
| Reed-Switch Magnetic (MR08, MR12, MR18) | M8, M12 & M18 flush barrels | 10 mm nominal (magnet-dependent) | 2-wire DC/AC reed switch outputs |
FEATURED MODELS
Representative Catalog Units
SELECTION & APPLICATION
Engineering Parameters to Confirm
- Through-wall detection behind aluminum or stainless housings
- Actuator, piston, and moving-carriage position sensing
- Long-gap magnet detection where inductive range is insufficient
- Clean, wear-free limit switching
Magnet strength & polarity
Effective switching distance depends directly on the actuating magnet grade, dimensions, and north/south pole orientation relative to the sensor face.
Non-ferromagnetic barrier wall
Magnetic fields pass cleanly through aluminum, plastic, brass, and non-magnetic stainless steel—avoid ferromagnetic carbon steel plates between magnet and sensor.
Solid-state vs reed output
Choose solid-state BHLN10 (NPN/PNP) for high switching frequency and bounce-free PLC inputs; choose MR reed switches for simple universal 2-wire circuits within rated load limits.
Stray field clearance
Keep high-current cables, solenoids, or adjacent magnets away from the sensing zone to prevent nuisance actuation.

FACTORY & OEM CAPABILITY
Direct Manufacturing, Testing & OEM Support
Every batch is assembled and electrically verified in-house at Hered Electric before export dispatch. Share your existing model code, target material, or custom cable/connector drawing for fast OEM pricing.
- Actuating magnet type/size and required sensing gap
- Barrier wall material and thickness (if sensing through a wall)
- Barrel size (M8/M12/M18) and NPN/PNP vs 2-wire reed output
- Supply voltage, cable length, and target quantity
FAQ
Frequently Asked Selection Questions
Can magnetic proximity sensors detect ordinary steel targets without a magnet?
No. Magnetic proximity sensors respond to a permanent magnetic field; use an inductive proximity sensor to detect unmagnetized steel or metal parts.
Can a magnetic sensor detect a magnet through a stainless steel wall?
Yes, through non-ferromagnetic austenitic stainless steel (such as 304/316), aluminum, or plastic walls, provided the magnet field strength at the sensor face exceeds the switching threshold.
