
HERED PRODUCTS
HJ68-25P1-P Ring Inductive Proximity Sensor
SKU: HJ68-25P1-P
HERED HJ68-25P1-P detects magnetic metal passing through a ring opening. It has a normally open PNP output and an M12 connector.
Product selection · Technical support · OEM & ODM
Categories:
Product details
Technical specifications
| Parameter | Value |
|---|---|
| Ordering code | HJ68-25P1-P |
| Sensing mode | Ring sensing |
| Output / wiring | DC 3-wire PNP normally open (NO) |
| Supply voltage | 10–30 V DC |
| Connection | M12 connector |
| Sensing target | Magnetic metal |
| Maximum load current | ≤150 mA |
| Protection rating | IP67 |
Selection and mounting
Route the part through the center of the sensing opening. Check clearance with the largest part and test detection with the smallest part at the intended feed rate.
Allow room for the mating M12 plug at the mount. For the same output with a fixed 2 m cable, see HJ68-25P1. For NPN output with the same connection, see HJ68-25N1-P.
Ordering information
For an enquiry about HJ68-25P1-P, send the part material and dimensions, feed rate and controller input. Request the model-specific drawing to confirm the clear aperture and mounting-hole positions.
