Skip to content

HERED PRODUCTS

HJ68-25N1 Ring Inductive Proximity Sensor

SKU: HJ68-25N1

HERED HJ68-25N1 detects magnetic metal passing through a ring opening. It has a normally open NPN output and a 2 m PVC cable.

Enquire about this product

Product selection · Technical support · OEM & ODM

Product details

Technical specifications

Parameter Value
Ordering code HJ68-25N1
Sensing mode Ring sensing
Output / wiring DC 3-wire NPN normally open (NO)
Supply voltage 10–30 V DC
Connection 2 m PVC cable
Sensing target Magnetic metal
Maximum load current ≤150 mA
Protection rating IP67

Selection and mounting

Route the part through the center of the sensing opening. Check clearance with the largest part and test detection with the smallest part at the intended feed rate.

Allow room to route the fixed cable from the housing. For the same output with an M12 connector, see HJ68-25N1-P. For PNP output with the same connection, see HJ68-25P1.

Ordering information

For an enquiry about HJ68-25N1, send the part material and dimensions, feed rate and controller input. Request the model-specific drawing to confirm the clear aperture and mounting-hole positions.