
HERED PRODUCTS
E3F-18S3MP2 Diffuse-Reflective Photoelectric Sensor
SKU: E3F-18S3MP2
HERED E3F-18S3MP2 is an M18 diffuse-reflective photoelectric sensor with a PNP normally closed output and a reference sensing distance of up to 3 m.
Product selection · Technical support · OEM & ODM
Product details
Technical specifications
| Parameter | Value |
|---|---|
| Ordering code | E3F-18S3MP2 |
| Sensing mode | Diffuse reflection |
| Output / wiring | DC 3-wire PNP normally closed (NC) |
| Supply voltage | 10–30 V DC |
| Mounting profile | M18 cylindrical body |
| Reference sensing distance | Up to 3 m |
| Setting distance (Sa) | 0–3 m under reference conditions |
| Reference target | White card with 90% reflectance |
| Sensitivity adjustment | Rear potentiometer |
| Operating mode | Dark-ON |
| Switching frequency | 600 Hz |
| Load current | 200 mA |
| Protection rating | IP65 |
| Housing material | ABS |
| Sensing face material | PC |
| Operating temperature | −20 to +55 °C |
Selection and mounting
Aim the sensor at the target surface for single-sided detection. The 3 m figure uses a reference target. Set the rear potentiometer with the actual part and background in place, then verify that the controller changes state at the required working distance.
Match the output to the controller input and required switching state. For normally open PNP, use E3F-18S3MP1. For the same switching state with NPN output, use E3F-18S3MN2.
Ordering information
For an enquiry about E3F-18S3MP2, include the target material, surface finish, working distance and controller input. Confirm the connection and outline drawing for your installation.
